1.0 hrs
Continued edge deburring center section ribs. I can get about 5 done in an hour.
Ugghh.
Van's RV-9A in Aurora
The Big Picture
Flying! 8/28/2011
skip to main |
skip to sidebar
Van's RV-9A in Aurora
Flying! 8/28/2011
Photo by E. Menezes
Follow along as Chip skins his knuckles to finally have his own plane.
Van's RV-9A in Aurora
Flying! 8/28/2011
Build Stats
Total Time: 2596 Hrs
Other Time: 107 Hrs
Rivets set: 17111
N207LT is flying!
Hobbs Time: 700 Hrs
Other Time: 107 Hrs
Rivets set: 17111
N207LT is flying!
Hobbs Time: 700 Hrs
Cav's Calendar
Photo by E. Menezes
Who is this guy?
Labels
- Canopy (2)
- Elevator start (1)
- Finish Kit (1)
- Fuselage "finished". (1)
- Fuselage Started (1)
- FWF (1)
- Horizontal Stabilizer (1)
- HS Done (1)
- Rudder complete (1)
- Rudder Start (1)
- Tools (1)
- Vertical Stabilizer (1)
- VS Done (1)
- Why? (1)
- Wing fabrication done (1)
- Wing Kit (1)
Blog Archive
-
▼
2009
(297)
-
▼
July
(26)
- 1.3 hrsDrill seat and baggage skins for center cov...
- 2.0 hrsDidn't use the clock, so this is a rough es...
- Oshkosh!
- 5.5 hrsGot a bunch of work done, and it's still ea...
- 1.4 hrsFinished match drilling the crotch strap as...
- 2.1 hrsDeburr 904 spar and 904H plates.Start debur...
- 1.2 hrsFinal trimmed all the rib snap bushing cuto...
- 1.5 hours on TuesdayTrimmed the seat/baggage rib ...
- 1.5 hrsStarted deburring center section parts.Got ...
- This posting is for yesterday, Sunday, July 19.4.5...
- 3.9 hrs, 103 rivetsWent flying this morning. A rea...
- 1.5 hrs, 54 rivetsDecided to try back riveting the...
- 2.0 hrs, 102 rivets10K rivets are coming up fast!F...
- 1.5 hrs, 79 rivetsGot the 623 ribs fluted and posi...
- 1.4 hrsMissed yesterday, out sick.Finish match dri...
- 4.9 hrs, 187 rivetsKatrin appeared this morning af...
- 6.5 hrs, 52 rivetsMade 615C spacers.Cut inboard se...
- 1.9 hrsFinished deburring the center section ribs....
- 1.6 hrsMore edge deburring. Got all the filing an...
- 1.0 hrsContinued edge deburring center section rib...
- 1.3 hrsDeburring center section ribs.
- 7 hrs, 98 rivetsEdge deburr 976 center section bot...
- 2.8 hrs, 6 rivetsStupid hot in the garage, the the...
- 3.4 hrStart dimpling. Mostly finished, just the bo...
- 3.8 hrsDeburred all parts.Drilled holes for static...
- 7.3 hrsFinal drill lower aft fuselage. There aren'...
-
▼
July
(26)
Links
First flight in Chip's plane? Read this.
script test
Weasel Words
This website is for entertainment purposes only and is not intended to be considered as instructions on how to build an RV-9A or any other aircraft.