6 hrs
Install lower baffle tension rods.
Install airvent hose to NACA scoops, with screens.
Continue sanding cowling.
Van's RV-9A in Aurora
The Big Picture
Flying! 8/28/2011
skip to main |
skip to sidebar
Van's RV-9A in Aurora
Flying! 8/28/2011
Photo by E. Menezes
Follow along as Chip skins his knuckles to finally have his own plane.
Van's RV-9A in Aurora
Flying! 8/28/2011
Build Stats
Total Time: 2596 Hrs
Other Time: 107 Hrs
Rivets set: 17111
N207LT is flying!
Hobbs Time: 700 Hrs
Other Time: 107 Hrs
Rivets set: 17111
N207LT is flying!
Hobbs Time: 700 Hrs
Cav's Calendar
Photo by E. Menezes
Who is this guy?
Labels
- Canopy (2)
- Elevator start (1)
- Finish Kit (1)
- Fuselage "finished". (1)
- Fuselage Started (1)
- FWF (1)
- Horizontal Stabilizer (1)
- HS Done (1)
- Rudder complete (1)
- Rudder Start (1)
- Tools (1)
- Vertical Stabilizer (1)
- VS Done (1)
- Why? (1)
- Wing fabrication done (1)
- Wing Kit (1)
Blog Archive
-
▼
2011
(137)
-
▼
March
(16)
- 1 hr More sanding. Takes about an hour per square ...
- 1 hrMore sanding on lower cowl.Haven't been postin...
- 1 hrMixed up some superfill and cemented one of th...
- 6 hrsMore misc stuff. Going to run out of these t...
- 6 hrsInstall lower baffle tension rods.Install air...
- 1 hrSpent an hour at Wayne's going through electri...
- 1 hrTrim oil cooler for more engine mount clearanc...
- Windscreen
- Airframe riveting complete
- 6 hrs, 40 rivetsContinue riveting top skin. Got a...
- 2.4 hrs, 39 rivetsContinued riveting top forward s...
- 16000 Rivets
- 1.5 hrs, 46 rivetsStarted riveting top forward ski...
- 1.2 hrs, 28 rivetsStart riveting panel attach stri...
- 6 hrsFinished wrapping electrical lines and shrink...
- 4hrsDidn't get as much done as I wanted. Have wri...
-
▼
March
(16)
Links
First flight in Chip's plane? Read this.
script test
Weasel Words
This website is for entertainment purposes only and is not intended to be considered as instructions on how to build an RV-9A or any other aircraft.