.8 hrs
Bend and cut material for the lower cowling attach strips. The bends worked out pretty well.
Van's RV-9A in Aurora
The Big Picture
Flying! 8/28/2011
skip to main |
skip to sidebar
Van's RV-9A in Aurora
Flying! 8/28/2011
Photo by E. Menezes
Follow along as Chip skins his knuckles to finally have his own plane.
Van's RV-9A in Aurora
Flying! 8/28/2011
Build Stats
Total Time: 2596 Hrs
Other Time: 107 Hrs
Rivets set: 17111
N207LT is flying!
Hobbs Time: 700 Hrs
Other Time: 107 Hrs
Rivets set: 17111
N207LT is flying!
Hobbs Time: 700 Hrs
Cav's Calendar
Photo by E. Menezes
Who is this guy?
Labels
- Canopy (2)
- Elevator start (1)
- Finish Kit (1)
- Fuselage "finished". (1)
- Fuselage Started (1)
- FWF (1)
- Horizontal Stabilizer (1)
- HS Done (1)
- Rudder complete (1)
- Rudder Start (1)
- Tools (1)
- Vertical Stabilizer (1)
- VS Done (1)
- Why? (1)
- Wing fabrication done (1)
- Wing Kit (1)
Blog Archive
-
▼
2010
(252)
-
▼
March
(27)
- .4 hrsJust a little quick work to say I worked on ...
- .5 hrsMeasured, cut, deburred, and bent the fuse t...
- 1.0 hrsTrim bottom cowling attach strips for width...
- 2 hrsDrill terminal blocks for wing attach to seat...
- Saturday, 3/276 hrsFinish ADAHRS mount brackets.Ma...
- 1.4 hrsGot a care package from UPS: the Dynon acce...
- 1.1 hrsRealized I needed to sand the roughness off...
- 1.4 hrsFinished making the U408 spacers.I went loo...
- 1.1 hrsEdge deburr all wheel fairing mount bracket...
- 1 hrMounted the brake flanges to the main gear leg...
- 4.2 hrsDrilled the ground tab and 60A alternator s...
- 3 hrs, 15 rivetsSpent more time than that, but it ...
- 5.0 hrs, 4 rivetsFit, drill, deburr, countersink l...
- .8 hrsBend and cut material for the lower cowling ...
- 1 hrDeburr and dimple leading edge of 7106. That ...
- 7.5 hrs, 17 rivetsFinished the battery and contact...
- 6.6 hrs, 24 rivetsA good day of kit construction w...
- 1.6 hrsDrill front edge of 7106 to firewall flange...
- 1.7 hrsInventory and store all the bags from the f...
- Finish kit is here!
- 1.1 hrsStart deburring and dimpling 7106 skin. St...
- 3 hrs, 62 rivetsCountersink pitot mast and finish ...
- 4.5 hrs, 2 rivetsFinally set the lp4-3 rivets at b...
- 1 hrMatch drill the 7106 front deck skin.Oh, and I...
- .6 hrsFinish clecoing 7106 skin to fuselage. Next ...
- 1.6 hrsNow that the panel is clecoed to the plane,...
- 1.1 hrsDeburr and dimple 7103B&C angles.Make 721D...
-
▼
March
(27)
Links
First flight in Chip's plane? Read this.
script test
Weasel Words
This website is for entertainment purposes only and is not intended to be considered as instructions on how to build an RV-9A or any other aircraft.