Removed left 970 skin.
Stop drilled, dressed and deburred crack at aft lower corner bend.
Cut 1" hole for fuel line grommet.
Start deburring holes.
Van's RV-9A in Aurora
The Big Picture
Flying! 8/28/2011
skip to main |
skip to sidebar
Van's RV-9A in Aurora
Flying! 8/28/2011
Photo by E. Menezes
Follow along as Chip skins his knuckles to finally have his own plane.
Van's RV-9A in Aurora
Flying! 8/28/2011
Build Stats
Total Time: 2596 Hrs
Other Time: 107 Hrs
Rivets set: 17111
N207LT is flying!
Hobbs Time: 700 Hrs
Other Time: 107 Hrs
Rivets set: 17111
N207LT is flying!
Hobbs Time: 700 Hrs
Cav's Calendar
Photo by E. Menezes
Who is this guy?
Labels
- Canopy (2)
- Elevator start (1)
- Finish Kit (1)
- Fuselage "finished". (1)
- Fuselage Started (1)
- FWF (1)
- Horizontal Stabilizer (1)
- HS Done (1)
- Rudder complete (1)
- Rudder Start (1)
- Tools (1)
- Vertical Stabilizer (1)
- VS Done (1)
- Why? (1)
- Wing fabrication done (1)
- Wing Kit (1)
Blog Archive
-
▼
2009
(297)
-
▼
September
(26)
- 1.2 hrsPrime servo bracket and other parts.Dimple ...
- Autopilot Pitch Servo Bracket
- 4.7 hrsFinish dimpling 470 skinsRemove, Deburr, di...
- 3.6 hrsClean and prime front and baggage ribs, lon...
- 1 hrRemoved left 970 skin.Stop drilled, dressed an...
- 1.0 hrDeburr and dimple 722 and 724 ribs.Drill sna...
- 1.0 hrsFinished countersinking the 972 bottom skin...
- For Monday, Sept 21.7 hrs, 12 rivetsInstalled nutp...
- 1 hrWent for a bike ride this morning. On the usua...
- 7 hrsFit step kit, both sides, drill and deburr. S...
- 2.0 hrs, 64 rivetsTook the day off work to spend s...
- 1.5 hrsDimpled the 972 skin. Borrowed an Avery C-...
- .7 hrsCountersunk the floor stiffeners.Setup to di...
- 1 hrDeburred 972 bottom skin. Dimpling that .040 ...
- 5 hrsFinished fuselage preassembly steps. Looked o...
- 2.7 hrsFinish drilling floor stiffeners.Finish deb...
- 1 hrMore match drilling of the floor stiffeners. ...
- 1.2 hrsStarted match drilling the floor stiffeners...
- 1.1 hrsRemark and redrill left brake pedal side br...
- Put on the brakes!
- 7.5 hrs, 4 rivetsActually got to set some rivets t...
- 3.7 hrsFinish fitting 9101.Drill 9101 to 902 bulkh...
- .8 hrsfitting 9101 and 976 spacers
- 1.7 hrsFinish deburring 9101's, aft canopy deck, b...
- 1.3 hrsGot a couple of presents today.My new autop...
- .7 hrsVery light day in the garage. Did get to fl...
-
▼
September
(26)
Links
First flight in Chip's plane? Read this.
script test
Weasel Words
This website is for entertainment purposes only and is not intended to be considered as instructions on how to build an RV-9A or any other aircraft.