Stopped by the hangar and put the seats back in, so the cabin is ready to fly. Also got the upper cowl in place, but it still needs to be fastened.
Removed the main gear fairings and brought them home.
After dinner, mixed up some epoxy and flox and bonded the intersection fairings to the wheel fairings. I expect this to work very well, and I may even be able to fly tomorrow.
The nose wheel fairing has cured nicely. I slopped on the epoxy, and it is really hard to sand off. It's going to take a while to get it ready for painting. Because of this, I was much more careful with the main gear fairings.