Van's RV-9A in Aurora

The Big Picture

The Big Picture
Flying! 8/28/2011

Sunday, June 12, 2011

7 hrs 32 rivets
Sand spinner for painting.
Fit rudder bottom cap. Drill and countersink for #6 screws, deburr, drill, dimple, and install nutplates.
Sand rudder bottom for painting.
Attach VS to fuselage. Install right Dynon.
Torque prop extension.

For Saturday, 5 hrs, 36 rivets
Workday at the airpark, so got a little bit of a late start.
Taking parts over to Waynes a few at a time.
Trim and fit right wing tip lense. Trim right wing tip.
Rivet nutplates to wing tips.
Trim and start sanding empennage fairing.