Mark left wheel fairing for final clearance trim.
Drill main gear fairing brackets for nutplates. Countersink.
Drill outside hinge for right main gear fairing.
Van's RV-9A in Aurora
The Big Picture
Flying! 8/28/2011
skip to main |
skip to sidebar
Van's RV-9A in Aurora
Flying! 8/28/2011
Photo by E. Menezes
Follow along as Chip skins his knuckles to finally have his own plane.
Van's RV-9A in Aurora
Flying! 8/28/2011
Build Stats
Total Time: 2596 Hrs
Other Time: 107 Hrs
Rivets set: 17111
N207LT is flying!
Hobbs Time: 700 Hrs
Other Time: 107 Hrs
Rivets set: 17111
N207LT is flying!
Hobbs Time: 700 Hrs
Cav's Calendar
Photo by E. Menezes
Who is this guy?
Labels
- Canopy (2)
- Elevator start (1)
- Finish Kit (1)
- Fuselage "finished". (1)
- Fuselage Started (1)
- FWF (1)
- Horizontal Stabilizer (1)
- HS Done (1)
- Rudder complete (1)
- Rudder Start (1)
- Tools (1)
- Vertical Stabilizer (1)
- VS Done (1)
- Why? (1)
- Wing fabrication done (1)
- Wing Kit (1)
Blog Archive
-
▼
2011
(137)
-
▼
May
(10)
- 6 hrs, 81 rivetsFinished wiring all cabin leds. N...
- 6 hrs 8 rivetsTrim and sand trailing edges of all ...
- For Friday, 5/276 hrs, 92 rivetsDrill and counters...
- 2 hrsMark left wheel fairing for final clearance t...
- 2 hrs, 34 minutesSafety wire heater and parking br...
- 3 hrsSnuck in a little time this morning before wo...
- 2 hrsSpent this evening finishing the in place dri...
- 2.2 hrsPrimed the windscreen and removed most of t...
- 2 hrs today.About 30 hours since the last entry. ...
- 2 hrsFinished priming the lower cowl. Took three ...
-
▼
May
(10)
Links
First flight in Chip's plane? Read this.
script test
Weasel Words
This website is for entertainment purposes only and is not intended to be considered as instructions on how to build an RV-9A or any other aircraft.