Finally put in some time on right wing final prep.Finish deburring nose ribs
Drill holes in 6 and 7 nose ribs for leading edge light attach.
Debur spice plate.
Drill spice plates for nutplates.
Cut holes for electrical conduit in main ribs and debur.
Debur and countersink spar
Scour splice plate and edges of nose ribs for priming.
Dimple nose ribs.
Need to scour and dimple the main ribs and then the ribs can all be primed.
Will try to use alodine to treat the main spar this time. Discovered three missing nutplate rivets for the outboard access plate.
