.8 hrs
Finish match drilling trailing edge.
Deburred the skin and started dimpling. I'll save the wedge countersinking until the left elevator is in the same state.
Van's RV-9A in Aurora
The Big Picture
Flying! 8/28/2011
skip to main |
skip to sidebar
Van's RV-9A in Aurora
Flying! 8/28/2011
Photo by E. Menezes
Follow along as Chip skins his knuckles to finally have his own plane.
Van's RV-9A in Aurora
Flying! 8/28/2011
Build Stats
Total Time: 2596 Hrs
Other Time: 107 Hrs
Rivets set: 17111
N207LT is flying!
Hobbs Time: 700 Hrs
Other Time: 107 Hrs
Rivets set: 17111
N207LT is flying!
Hobbs Time: 700 Hrs
Cav's Calendar
Photo by E. Menezes
Who is this guy?
Labels
- Canopy (2)
- Elevator start (1)
- Finish Kit (1)
- Fuselage "finished". (1)
- Fuselage Started (1)
- FWF (1)
- Horizontal Stabilizer (1)
- HS Done (1)
- Rudder complete (1)
- Rudder Start (1)
- Tools (1)
- Vertical Stabilizer (1)
- VS Done (1)
- Why? (1)
- Wing fabrication done (1)
- Wing Kit (1)
Blog Archive
-
▼
2008
(127)
-
▼
April
(10)
- 1 hr.Dimple left elevator stiffeners.Clean gummy e...
- .7 hrsCleaned left elevator parts with MEK and the...
- 3.2 hrs.Match drill left elevator skin. I've read...
- Left elevator skeleton
- .8 hrsFinish match drilling trailing edge. Deburre...
- 1.1 hrs and 5 rivetsFinished riveting spar to bott...
- 2.3 Hrs, 75 RivetsRiveted spar to bottom skin, exc...
- Saturday2.2 hours, 164 rivetsRiveted spar to the u...
- Right elevator assembly
- Right elevator match drilling
-
▼
April
(10)
Links
First flight in Chip's plane? Read this.
script test
Weasel Words
This website is for entertainment purposes only and is not intended to be considered as instructions on how to build an RV-9A or any other aircraft.