Drill 705B and C center section to 705A bulkhead.
Position and drill G spacers.
Drill left seat belt brackets and position.
Enlarge relief holes on control column mounts to 1/2 inch.
Van's RV-9A in Aurora
The Big Picture
Flying! 8/28/2011
skip to main |
skip to sidebar
Van's RV-9A in Aurora
Flying! 8/28/2011
Photo by E. Menezes
Follow along as Chip skins his knuckles to finally have his own plane.
Van's RV-9A in Aurora
Flying! 8/28/2011
Build Stats
Total Time: 2596 Hrs
Other Time: 107 Hrs
Rivets set: 17111
N207LT is flying!
Hobbs Time: 700 Hrs
Other Time: 107 Hrs
Rivets set: 17111
N207LT is flying!
Hobbs Time: 700 Hrs
Cav's Calendar
Photo by E. Menezes
Who is this guy?
Labels
- Canopy (2)
- Elevator start (1)
- Finish Kit (1)
- Fuselage "finished". (1)
- Fuselage Started (1)
- FWF (1)
- Horizontal Stabilizer (1)
- HS Done (1)
- Rudder complete (1)
- Rudder Start (1)
- Tools (1)
- Vertical Stabilizer (1)
- VS Done (1)
- Why? (1)
- Wing fabrication done (1)
- Wing Kit (1)
Blog Archive
-
▼
2009
(297)
-
▼
June
(30)
- 1.9 hrsClecoed the tail cone and aft bulkheads to ...
- 2.5 hrsTrim stringers to fit bulkheadsMatch drill ...
- 6 hrs, 51 rivetsPrime and rivet 710 711 712 bulkhe...
- 6.0 hrsFinished up some outstanding items, recover...
- 2.0 hrsFinished bending the longerons. Got out dra...
- 3 hrsStarted bending the longerons.But first, boug...
- 1.5 hrsCleaned all the gorilla duct tape goop and ...
- 1.9 hrsTrimmed the cutout from 711 bulkheads. Sand...
- More aft bulkhead prep.Straighten aft bulkheadsMat...
- 7.0 hrsFinish control column assembly. Such simple...
- 8 hrs, 137 rivetsRiveted the 905 bulkhead. Had to ...
- 1.6 hrs, 89 rivets.Finally got to do some riveting...
- 2.0 hrsPrime the 5, 6, 7, and 8 bulkhead parts.
- 2.2 hrsFinish fluting bulkheads.Dimple and counter...
- 1.8 hrsDeburr 707, 708,709 bulkheads and bellcrank...
- 2.6 hrsDrill 1/4" holes in bellcrank anglesCleco a...
- 7.0 hrs.A marathon of edge deburring on aft bulkhe...
- 4.0 hrsBend 705L platesMatch drill 705J angle to 7...
- 4.0 hrsSkipped the ROT rally and worked on the kit...
- 2.5 hrsDrill 705B and C center section to 705A bul...
- 2.7 hrsThe order from Van's arrived just as I got ...
- 2.5 hrsStart deburring parts for 705 bulkhead. Got...
- 1.2 hrsMake spacers for 904 bulkhead. Charged an h...
- 5 hrs, 44 rivets.Drill cover support ribs to front...
- 5.0 hrs, 116 rivetsF904 bulkheadFinal drill bulkhe...
- 904 Bulkhead
- Firewall done
- 2.3 hrs, 100 rivetsGot most of the firewall riveti...
- 1.8 hrs, 11 rivetsContinued fastening tanks to win...
- 1.8 hrsFinished left wing conduitReinstalled right...
-
▼
June
(30)
Links
First flight in Chip's plane? Read this.
script test
Weasel Words
This website is for entertainment purposes only and is not intended to be considered as instructions on how to build an RV-9A or any other aircraft.