1.2 hrs
Drilled and bent tunnel cover.
Trimmed and deburred tunnel cover Z brackets.
Last post for a few days. Off to Portland for SuperComputing 2009.
Sadly, no visit to Van's.
Van's RV-9A in Aurora
The Big Picture
Flying! 8/28/2011
skip to main |
skip to sidebar
Van's RV-9A in Aurora
Flying! 8/28/2011
Photo by E. Menezes
Follow along as Chip skins his knuckles to finally have his own plane.
Van's RV-9A in Aurora
Flying! 8/28/2011
Build Stats
Total Time: 2596 Hrs
Other Time: 107 Hrs
Rivets set: 17111
N207LT is flying!
Hobbs Time: 700 Hrs
Other Time: 107 Hrs
Rivets set: 17111
N207LT is flying!
Hobbs Time: 700 Hrs
Cav's Calendar
Photo by E. Menezes
Who is this guy?
Labels
- Canopy (2)
- Elevator start (1)
- Finish Kit (1)
- Fuselage "finished". (1)
- Fuselage Started (1)
- FWF (1)
- Horizontal Stabilizer (1)
- HS Done (1)
- Rudder complete (1)
- Rudder Start (1)
- Tools (1)
- Vertical Stabilizer (1)
- VS Done (1)
- Why? (1)
- Wing fabrication done (1)
- Wing Kit (1)
Blog Archive
-
▼
2009
(297)
-
▼
November
(25)
- 1 hrDeburred aft fuselage bulkheads and started fi...
- 5 hrs, 59 rivetsDeburr and drill nutplates in 785 ...
- 6 hrsScuff, clean, prime, paint aft baggage bulkhe...
- Electric Flaps
- 5 hrs, 24 rivetsScuff, clean, prime, paint baggage...
- 5.5 hrs, 34 rivetsFit, drill, deburr, and dimple a...
- 3 hrs, 17 rivetsDeburred all 982 front cover parts...
- 1.8 hrs, 55 rivetsFinished riveting the seats. The...
- 7.1 hrs, 87 rivetsA bunch of work today. There are...
- 6.9 hrs, 8 rivetsFinish fabbing aileron trim assem...
- 2.0 hrsBack from SuperComputing 09 in Portland. No...
- 1.2 hrsDrilled and bent tunnel cover.Trimmed and d...
- 3 hrs, 60 rivetsFit, trim, and drill left 6111 rib...
- 2.4 hrsDrill 637E seat hinges to seat pans.Deburr....
- Went to the EAA187 meeting tonight and put down a ...
- 3.1 hrsArranged a visit by Seth Hancock and Deene ...
- 1.1 hrsMade all the 637 seat back hinges. There's ...
- For Sunday. Forgot to post4.9 hrsTrim and deburr 6...
- 3.5 hrsActually spent almost the whole day on the ...
- 1.3 hrsFinish match drilling top aft skins, includ...
- 1.5 hrsFinish clecoing 7112 skin to fuselage.Fit n...
- 1.5 hrsBevel 788 gussetStrip plastic and edge debu...
- 1.5 hrsIs any one else excited about the new Dynon...
- 1.3 hrsPage 11.Trim ends of 786A stringers. These...
- 6 hrs, 112 rivetsNot sure why it took that long. T...
-
▼
November
(25)
Links
First flight in Chip's plane? Read this.
script test
Weasel Words
This website is for entertainment purposes only and is not intended to be considered as instructions on how to build an RV-9A or any other aircraft.