Finish deburring flap main ribs.
Deburr nose ribs, brackets, and spacers, 906 parts.
Dimple nose ribs.
Alumaprep, alodine, and prime nose ribs, brackets, spacers, 906 parts.
Van's RV-9A in Aurora
The Big Picture
Flying! 8/28/2011
skip to main |
skip to sidebar
Van's RV-9A in Aurora
Flying! 8/28/2011
Photo by E. Menezes
Follow along as Chip skins his knuckles to finally have his own plane.
Van's RV-9A in Aurora
Flying! 8/28/2011
Build Stats
Total Time: 2596 Hrs
Other Time: 107 Hrs
Rivets set: 17111
N207LT is flying!
Hobbs Time: 700 Hrs
Other Time: 107 Hrs
Rivets set: 17111
N207LT is flying!
Hobbs Time: 700 Hrs
Cav's Calendar
Photo by E. Menezes
Who is this guy?
Labels
- Canopy (2)
- Elevator start (1)
- Finish Kit (1)
- Fuselage "finished". (1)
- Fuselage Started (1)
- FWF (1)
- Horizontal Stabilizer (1)
- HS Done (1)
- Rudder complete (1)
- Rudder Start (1)
- Tools (1)
- Vertical Stabilizer (1)
- VS Done (1)
- Why? (1)
- Wing fabrication done (1)
- Wing Kit (1)
Blog Archive
-
▼
2009
(297)
-
▼
May
(29)
- 7.5 hrsMajor progess on the firewall.Fabricate 601...
- Firewall
- 2.2 hrsspent 1 hour pushing conduit into the right...
- 3.7 hrs, 4 rivetsFinally riveted the aileron stops...
- 1.5 hrsRemove ailerons.Drill aileron stops. Remov...
- Flaps done!
- 8.2 hrs, 8 rivetsWorked on aileron attach and bell...
- 4 hrsProseal flap trailing edges and cleco to tabl...
- 2.3 hrsSpent today preparing for the proseal tasks...
- 2.3 hrs, 114 rivetsFinished riveting right flap bo...
- 2.0 hrs, 83 rivetsFinished riveting the right flap...
- 2.1 hrs, 128 rivetsFinished the bottom skin/spar r...
- 1.5 hrs, 46 rivetsStarted riveting the left flap l...
- 5.3 hrs, 204 rivetsCleco LE skins and tops skins t...
- 20 years
- 4.3 hrs 23 rivetsFinish riveting nose rib assembli...
- Fuselage kit arrived!
- 1.4 hrs.Washed, MEK'd, and primed the flap spars a...
- 1.3 hrsCountersunk the left flap trailing edge wed...
- 4.7 hrs, 7 rivets.Dimple flap leading edge skins.C...
- 4 hrsFinish deburring flap main ribs.Deburr nose r...
- 1.5 hrsFinished deburring the flap skins. Started...
- 1.6 hrsFinished edge deburring flap skins. Starte...
- 1.5 hrsSanded the edge of all of the flap skins, g...
- 1.5Finished match drilling the left flap, includin...
- 2.4 hrsRemove cover from left tank. That was diffi...
- Right flap construction
- 4.1 hrsStarted flap construction in earnest.Drill ...
- Flaps started.
-
▼
May
(29)
Links
First flight in Chip's plane? Read this.
script test
Weasel Words
This website is for entertainment purposes only and is not intended to be considered as instructions on how to build an RV-9A or any other aircraft.