Van's RV-9A in Aurora

The Big Picture

The Big Picture
Flying! 8/28/2011

Sunday, August 1, 2010

5 hrs
Continued cutting the canopy. Used a unibit to cut the latch handle hole, and made the final aft trim cut. Left about an inch hanging over in the back. When I put the canopy back on the airframe, the canopy/aft deck transition is very pleasing.

Also got some FWF/electrical work done. Finished up the alternator power feed and started clamping it in place. I need to use sump/air plenum bolts as clamp points for both the alternator and starter power cables. Need to do some research on this.